Jimenez Arms 380 How It Works with Breakdown and Re-assembly

Tags: Handguns, Semi Auto Pistols, Reviews, Firearms
Posted on Monday, January 9th, 2012 ~ Video Length: 4:13 SD 139907 Views ~ 448 Likes

Jimenez Arms 380 How It Works with Breakdown and Re-assembly" ~ from LetsLookItOver

"Jimenez Arms 380 How It Works with Breakdown and Re-assembly" ~ from LetsLookItOver
Jimenez .380 breakdown, gun function, and reassembly.

Related: Handguns, Handguns/Semi Auto Pistols, Reviews, Firearms

Something else... By the way, in case you might be interested in Handguns or Firearms, we thought this video was interesting too. Our friends at 1957Shep posted about Handguns in their video from August 23rd. It's called Astra Model 960 Revolver 38 Special. This is what they said about the video. The Astra model 960 is a large frame revolver about the soze of a S&W N Frame. They were made in both 38 special and 357 magnum. End of video shout out is for topwater1976. Find the channel by following the link below. But if you want to see the whole thing, just go to this page Astra Model 960 Revolver 38 Special. We're pretty sure you'll like this Handguns video! Some other videos are in Firearms, Reviews, Handguns/Revolvers.

Another video in Handguns/Semi Auto Pistols is this one titled Stoeger STR-9 - Unboxing and First Shots 2019 and it was done by Affordable Armory. It's about Handguns/Semi Auto Pistols and Firearms and was added April 25th. So after checking out Astra Model 960 Revolver 38 Special, don't forget Stoeger STR-9 - Unboxing and First Shots 2019. See this Handguns/Semi Auto Pistols video by clicking here. It's a long video, 653 seconds (10:53). And here's what it's about: I found a gun that no one has really talked about since SHOT Show. It's the STR-9 from Stoeger, a company known for their shotguns. Watch as I unbox the gun and put the first rounds through it. Sorry I forgot a picture of the target at the end. Affordable Armory Hats and Shirts.

Comments (24):

There have been 24 comments on this video from Tuesday, January 10th, 2012 to Tuesday, April 2nd, 2019. Comments have been closed on this video, "Jimenez Arms 380 How It Works with Breakdown and Re-assembly".
Comment on: Tuesday, April 2nd, 2019 by BEN DESROSIER
Good video. Should have watched the full vid b4 breakdown. Was chasing 5 little parts down for 2 days! lol
Comment on: Tuesday, January 9th, 2018 by MARVIN PARKER
I'm having failure to extract problems shoots the first bullet an it's downhill from there help!!?!!?
Comment on: Saturday, August 5th, 2017 by CHEFKEITH99
good video keep them coming
Comment on: Tuesday, May 16th, 2017 by HARRIS SKINNER
04/2017 My JA 380 is wonderful have put 156 rounds down range no promble...did polish my feedramp and BAM eats anything...Stay with what Jimenez Arms issued to shoot in it DUH !
Comment on: Saturday, April 15th, 2017 by JASON TAYLOR
You really own a Jimenez and use a dry cleaner? That's a clash of society's there!
Comment on: Thursday, April 6th, 2017 by DES GARCIA
thank you for this video.... very helpful
Comment on: Saturday, October 29th, 2016 by DEREK COURSON
It's Hemenez.... not Jim....
Comment on: Saturday, October 22nd, 2016 by GERMAN OLIVARES
I have one of these, here in Mexico they're hard to find, your video help me a lot because no one know anything about my gun, I just bought it because it was cheap
Comment on: Thursday, February 25th, 2016 by JITO463
I wish I'd seen this video before I took mine apart for cleaning. I stupidly hit the trigger, and sent the cam (what you referred to as the linkage) flying, and can't find the stupid thing. Now I have to order another one. Well, lesson learned, I suppose. At least I found the Sear assembly & spring. Very informative video, nonetheless.
Comment on: Tuesday, January 26th, 2016 by SHANNON MUSE
can you do a video with it in pieces? I have one I'm trying to put back together...Rece ived all torn up
Comment on: Saturday, November 7th, 2015 by MARK WARNBERG
The Cobra Deneli and CA380 series are pretty much the same gun (though the new Deneli uses a polymer frame), they have the recoil spring on the barrle, I wonder if anyone has tried doing this on the JA380 and if it improves the slide action? Anyone!!
Comment on: Wednesday, June 24th, 2015 by MARK WARNBERG
Saw a video where the guy lift and pulled the slide back far enough so that he could push the fireing pin keeper in and down under the slide into the grove, no need for an insturment to push it into Place.
Comment on: Sunday, March 29th, 2015 by NICK F
the linkage on the rear right of the gun, pointed out at 1:00 in the video. Is there a channel or slot cut into the slide just above it to allow it to pivot upwards when the slide is on the frame? I ask because i picked up a pistol with a jennings / bryco 38 slide that has an identical linkage setup but will not fire correctly. I noticed the slide does not have a channel or groove cut into it which would allow the linkage to pivot and lower the sear.
Comment on: Sunday, March 15th, 2015 by AUSTIN MELBOURNE
Is there any way to disassemble the magazine? One of my mags will only hold 4 rounds and the spring, plastic thing gets jammed if I load anymore rounds, but if I slam it it springs up.
Comment on: Tuesday, June 10th, 2014 by JACK DARAPPER
Does the gun have to be empty before you clean it? Thanks in advance. I'm getting ready to purchase my first gun.
Comment on: Saturday, March 29th, 2014 by WIL GEORGE
hey, how are you? i have a question. the clip of my bryco won't stay in. How can I repair that? I am having a hard time finding such tutorials. thanks
Comment on: Thursday, January 30th, 2014 by PINKOLD
A friend of mine just bought a used one of these for his wife to use to protect herself CCW and at home. Judging by many of the comments on it, I think I need to gently tell him that this was a very bad buy. Funny thing is that he also bought a used Taurus PT24/7 Pro in .45 ACP, which looks to be a perfectly acceptable sidearm, if not quite a top of the line make/model. Maybe he could consider getting her able to handle it instead.
Comment on: Friday, January 24th, 2014 by PAUL GARNIER
This was the best explanation of this gun I could find! Awesome job. My Bryco 380 has been broken for a couple of years. With this video, I was able to understand the gun enough to fix it. The sear and spring were not moving in the channel. with a good cleaning and a little lube, the pistol now works great. A Big THANK YOU!!
Comment on: Tuesday, October 1st, 2013 by RPGAMER
I just got the T-380 and was just looking up the information on how to breakdown it down. This was the closest thing I could find. Very helpful, thank you.
Comment on: Saturday, September 14th, 2013 by ORIGINALKOMATOAST
Thanks for the info about the results of the ramp polishing.
Comment on: Monday, July 22nd, 2013 by MCGEE1115
I have a Jimenez 380 its a POS. I cant in good conscience even sell it to anyone. I have done everything possible to make it function right but its a lost cause. FTFs, FTEs Stove pipes, light primer strikes it is worthless. It would make a nice hood ornament, but thats all its good for. If I ever get in a shoot out I hope the other guy has a Jimenez.
Comment on: Tuesday, May 28th, 2013 by JAUGUST55
Greetings! Could you elaborate (perhaps with a video) on the feed ramp polishing and "a little more work"? Want to make sure that the one my wife has works well. THANKS!
Comment on: Monday, January 28th, 2013 by CHAD FORD
what website can you purchase jimenez firearms online
Comment on: Tuesday, January 10th, 2012 by HARDCASLTE
LOL I came here for the cat

More videos about LetsLookItOver

If you're interested in handguns, handguns/semi auto pistols, reviews and firearms, then you might also like to check out some of these other LetsLookItOver videos.